KEBA DO470/B Digital Output Module (Kemro K2-400 Series) I. Product Overview
KEBA DO470/B Digital Output Module (Kemro K2-400 Series) I. Product Overview
The KEBA DO470/B is a high-density, high-current digital output module of the Austrian KEBA Kemro K2-400 platform. It belongs to the KeConnect I/O family and is specifically designed for medium-sized industrial equipment such as injection molding, die-casting, and machine tools. The module is installed using a backplane bus slot method and is directly embedded into the K2-400 controller frame. It converts the main control logic signals into 24V DC high-power switching signals to drive heavy-load actuators such as solenoid valves, hydraulic valves, contactors, and heaters. It is a core I/O module for high-reliability and high-load scenarios.
II. Core Functions
16 Independent High Current Outputs
16 channels are completely independent, with PNP source-type transistor outputs (24V DC), each channel has strong single-channel driving capability, suitable for industrial-grade heavy-load loads, and each channel can be independently programmed for on/off control.
Graded High Current Drive
The output channels are grouped according to load capacity: 1 channel × 2A, 5 channels × 1A, 10 channels × 0.5A, with a total current of up to 8A. It can directly drive hydraulic solenoid valves, large contactors, heating relays, without the need for additional power amplification boards.
High-speed Response and Precise Timing
Typical response time < 150μs, supports high-speed action control (such as injection molding / mold clamping, die-casting injection, machine tool tool change), ensuring precise synchronization of complex process timing.
Strong Isolation Anti-interference Design
Optical isolation between channels, on the output side and the system control side. Isolation withstand voltage ≥ 500V AC (1 minute). Effectively suppresses spike interference generated by motor start-stop, frequency converter, and contactor, suitable for high electromagnetic interference industrial sites.
All-round Protection Mechanism
Integrated single-channel short circuit protection, overload protection, reverse polarity protection, overheat protection, overcurrent lockout; Fault channels are automatically shut off without affecting other channels, automatically restored after fault resolution, reducing downtime risks.
LED Status Diagnosis
Each channel is equipped with a green LED (channel status): constantly on = ON, off = OFF; the module has a common fault LED, which lights up to indicate any channel short circuit / overload, allowing for quick fault location without tools.
K-bus Bus Communication and Hot Swap
Communicates with K2-400 controller through KEBA dedicated K-bus backplane bus, automatically identifies modules and configurations, supports hot swapping, can directly replace modules during operation without stopping or power-off, simplifying maintenance.
Industrial-grade Wide Temperature and Reinforced Design
Uses reinforced PCB, industrial-grade components, fully sealed dustproof, resistant to vibration / impact; wide temperature operation suitable for harsh workshop environments, supports 24-hour continuous operation.
III. Technical Specifications (Official Standard Specifications)
Model: DO470/B
Series: Kemro K2-400 / KeConnect I/O
Number of Channels: 16 Digital Output Channels
Output Voltage: 24V DC (allowable fluctuation 19.2V - 30V DC)
Output Type: PNP Source-type Transistor Output
Single Channel Current: 1×2A; 5×1A; 10×0.5A (continuous)
Module Total Current: 8A (maximum)
Response Time: Typical < 150μs, Maximum ≤ 1ms
Isolation Method: Optical Isolation (between channels, system side - output side)
Isolation Voltage: ≥ 500V AC (1 minute)
Status Indication: Each channel green LED + common fault LED
Protection Functions: Short Circuit, Overload, Reverse Polarity, Overheat, Overcurrent Lockout
Communication Interface: KEBA K-bus Backplane Bus
Module Power Supply: 24V DC (supplied by K-bus bus)
Operating Temperature: 0℃ - +55℃
Storage Temperature: -40℃ - +70℃
Humidity Requirements: 10% - 95% (no condensation)
Protection Grade: IP20 (module front)
Installation Method: Backplane slot of K2-400 controller
Dimensions (Width × Height × Depth): Approximately 62mm × 160mm × 131mm
Weight: Approximately 1950g
Certifications: CE (EMC/LVD), RoHS, UL 508, EN 61131-2
IV. Design Features
High-density High Current Integration The 16-channel heavy-duty channel is integrated within a 62mm width, balancing high channel count and large driving capacity, significantly saving cabinet space and being suitable for compact medium and large-sized equipment.
Graded output is compatible with multiple loads
Current grading design (2A/1A/0.5A), capable of simultaneously driving different power loads, without the need to pair multiple modules, simplifying system configuration and procurement costs.
High reliability and long lifespan
Full-process industrial-grade testing (high temperature, low temperature, vibration, shock, EMC), MTBF ≥ 500,000 hours, suitable for 24-hour continuous operation scenarios in injection molding, die-casting, machine tools, etc.
Easy maintenance and low failure
LED intuitive diagnosis, quickly locating faulty channels; hot-swappable design supports non-stop replacement, shortening maintenance time; faulty channels are independently protected, not spreading the fault range.
Platform-specific compatibility
Only compatible with KEBA Kemro K2-400 series controllers, not compatible with K2-200 series (DO272/A, DO242/A), P30 series (DO321/B); K2-400 rack plug-and-play, new and old systems can be directly replaced.
VII. Typical Application Scenarios
Injection molding machinery
Control mold clamping / injection / pin hydraulic solenoid valves, mold heating contactors, barrel heating relays, alarm indicator lights, safety door interlock signals.
Die-casting equipment
Drive injection / boosting / core-pulling high-pressure solenoid valves, mold cooling waterway switches, heating ring contactors, spraying device solenoid valves.
Industrial machine tools / machining centers
Drive cooling pump / lubrication pump high-power contactors, spindle forward/reverse solenoid valves, tool changing mechanism actions, machine tool alarm lights, hydraulic station control valves.
Hydraulic and pneumatic automation
Control large hydraulic station solenoid valves, pneumatic actuators, vacuum generators, high-voltage relays, hydraulic clamping devices.
General industrial heavy-duty control
Drive 24V DC high-power relays, contactors, heaters, large indicators, buzzers, suitable for various discrete manufacturing heavy-duty scenarios.
Six. Installation and Wiring Key Points Installation steps
First installation: Power off the controller, align the K2-400 backplane slot and push it in smoothly, then lock it with the clip;
Module replacement: Supports hot swapping. Simply pull out the old module and insert the new one. The controller will automatically recognize it, and no restart is required.
Wiring specifications
Power supply: The module is powered by the K-bus bus, no additional external power supply is needed;
Output wiring: O1 to O16 connect to the positive terminals of the loads, and the negative terminals of the loads are all connected to the 24V DC 0V common terminal;
Inductive loads (electromagnetic valves / contactor coils): A parallel shunt diode (1N4007) must be connected to suppress reverse electromotive force and protect the output transistor;
Wire diameter: 1.0 to 2.5mm² multi-strand copper core wire. Heavy-load circuits are routed separately, strong and weak electricals are separated to reduce interference.
VII. Troubleshooting Guide
Single-channel LED does not light up, no output
Check if the K-bus bus connection is loose;
Confirm that channel programming is enabled and the output logic is correct;
Check for load open circuit and wiring looseness;
Test if the channel is locked due to short circuit / overload, and restart the power off to restore.
Common fault LED lights up
Check the output circuit short circuit and load damage one by one when power is off;
Check if the inductive loads are not connected with shunt diodes;
Confirm if the total current of the module exceeds 8A and if the load configuration exceeds the limit.
Output misoperation / instability
Check that the system is well grounded, the controller is common ground with the on-site equipment;
Check for strong interference sources (large power motors, frequency converters), add shielding wires;
Confirm that the shunt diode is installed correctly and intact.