1. Product Overview

2. Main Features

1. Fully compliant with standard EtherNet/IP protocol, support scheduled I/O connection and explicit message communication

2. Support two mainstream AutoMax communication modes: DCSNet network and AutoMax Remote I/O bus

3. Work as DCSNet master or slave station to realize real-time data interaction with AutoMax controllers

4. Built-in Remote I/O scanner function, support scanning and managing multiple AutoMax remote I/O stations

5. Support maximum 500 input words and 248 output words data transmission

6. Built-in embedded web server, complete parameter setting and device diagnosis through web page

7. Equipped with Micro SD card slot for configuration file backup, recovery and firmware upgrade

8. Multiple working modes optional: DCSNet2, AMXRIO, DCSLOG, AMXCapt

9. Automatically map AutoMax I/O data to EtherNet/IP controller tags for convenient program editing

10. Low power consumption design, stable operation in general industrial control environment

3. Technical Specifications

3.1 Power Supply

3.2 EtherNet/IP Interface

3.3 AutoMax Communication Interface

3.4 Environmental Parameters

3.5 Physical Parameters

4. LED Status Definition

5. Installation and Wiring Instructions

1. Firmly install the gateway on the DIN rail inside control cabinet

2. Connect 12-24VDC stable power supply according to wiring definition

3. Connect Ethernet cable to RJ45 port to access upper EtherNet/IP control system

4. Use shielded communication cable to connect AutoMax bus to terminal terminals

5. Modify gateway IP address through computer web page and select corresponding working mode

6. Scan online AutoMax devices and complete cross-network data point mapping

7. Save all configurations, restart the device and complete system joint debugging

6. Working Mode Introduction

1. DCSNet2 Mode

   Realize data exchange between EtherNet/IP and AutoMax DCSNet network, suitable for connecting AutoMax host controllers.

2. AMXRIO Mode

   Used for scanning AutoMax remote I/O bus, collecting and controlling field distributed I/O modules.

3. DCSLOG Mode

   Realize DCSNet bus data capture and recording, used for equipment operation analysis and fault troubleshooting.

4. AMXCapt Mode

   Offline collect Remote I/O bus data, convenient for project simulation and program pre-debugging.

7. Application Scope

1. Old Reliance AutoMax control system renovation and upgrade projects

2. Large industrial production line original AutoMax equipment access EtherNet/IP system

3. Chemical, metallurgy and other industries legacy automation system integrated transformation

4. Mixed networking of multi-brand controllers and unified monitoring management

5. Phased equipment replacement and gradual migration of industrial control systems

6. Remote centralized monitoring system based on original AutoMax field I/O

8. Safety Operation Notes

1. All wiring work must be completed under power off state

2. AutoMax bus must use shielded cable to avoid external electromagnetic interference

3. Keep bus communication parameters consistent with all field devices

4. Do not use the device beyond the specified voltage and temperature range

5. Avoid installing the gateway in high humidity, dust and strong interference area

6. Professional automation technicians are recommended to complete configuration and system debugging