1. Product Overview

1.1 Part Number

1.2 Product Type

1.3 Code Explanation

• A02B: FANUC CNC system series code

• 0200: Basic hardware model code

• C115: Functional configuration and version specification code

1.4 Application

2. Technical Specifications

• Rated Working Voltage: DC 24V ±10%

• Operating Temperature: 0℃ ~ +55℃

• Storage Temperature: -20℃ ~ +70℃

• Relative Humidity: 10% ~ 90%, non-condensing

• Installation Method: Standard control cabinet card slot plug-in mounting

• Electromagnetic Compatibility: Industrial grade anti-interference level

• Operation Mode: Support 24-hour continuous stable operation

• Safety Standard: Compliant with industrial electronic insulation and safety norms

3. Product Features

1. Industrial-grade circuit design, stable performance and strong anti-electromagnetic interference capability.

2. Standard A02B series mounting dimension, good compatibility and interchangeability.

3. C115 dedicated circuit configuration, complete interface definition, fully compatible with original equipment.

4. Built-in over-current, over-voltage and anti-static protection circuits to protect electronic components.

5. Strict component screening and long-term aging test, low failure rate and long service life.

6. Easy installation, plug-and-play, convenient for on-site replacement and equipment maintenance.

4. Installation Instructions

1. Disconnect the main power supply of CNC equipment before installation and maintenance.

2. Take anti-static protection measures to prevent static damage to the circuit board.

3. Verify the part number A02B0200C115 to confirm model matching.

4. Clean the cabinet slot interior, remove dust and metal debris.

5. Align the circuit board with the guide slot, insert smoothly and fix in place.

6. Tighten fixing screws evenly; do not over-tighten to avoid PCB deformation.

7. Connect power and signal lines strictly according to interface marking.

8. Recheck all connections, close cabinet door, then perform power-on test run.

5. Operation Precautions

1. Use only standard rated power supply; abnormal voltage input is prohibited.

2. Hot plugging and unplugging are strictly forbidden when the device is powered on.

3. Do not use in environments with heavy dust, corrosive gas, water splash and strong vibration.

4. Keep away from high-power equipment and strong electromagnetic interference sources.

5. Do not disassemble, modify or replace internal components without professional permission.

6. Power off immediately for inspection if system alarm, signal abnormality or startup failure occurs.

6. Maintenance & Storage

6.1 Daily Maintenance

6.2 Storage Conditions

6.3 Handling Notice

6.4 Shelf Life

7. Quality Guarantee

1. A02B0200C115 complies with FANUC CNC industry manufacturing standards.

2. All products pass functional test, aging test and full inspection before delivery.

3. This manual is applicable to original and compatible replacement parts of A02B0200C115.