1. General Information

• Model: OP341/Y‑1400

• Manufacturer: KEBA AG (Austria)

• Type: Kemro K2‑200 Operator Panel / HMI + Keyboard (for Haitian injection molding machines)

• Order No.: OP341/Y‑1400 (also written OP341Y‑1400)

• Display: 10.4” TFT LCD (F10 variant)

• Keypad: Membrane keyboard with function keys + numerical keys

• Mounting: Front panel mount (control cabinet door)

• Protection Class: Front IP65, rear IP20

• Weight: Approx. 1.5 kg

• Dimensions: Approx. 280 × 200 × 50 mm (W×H×D)

2. Electrical Specifications

• Operating Voltage: 24 V DC (±10%) (from RS‑091/A)

• Current Consumption: ≤ 1.2 A

• Display: Color TFT, LED backlight, 800×600 resolution

• Touchscreen: Resistive (supports glove operation)

• Keypad: 64 keys, tactile membrane, long life

• Protection: Overvoltage, reverse polarity, ESD, short‑circuit

• Isolation: 500 V AC (front panel to internal electronics)

3. Communication Interfaces

• K2 Bus: To CP033/Y CPU (backplane)

• Ethernet: 10/100 Mbps (programming, data exchange)

• USB 2.0: Data transfer, recipe upload/download

• Serial: RS‑232 (printer, barcode scanner)

4. Key Functions

1. Machine Operation: Manual/automatic mode, jog, setpoints, recipe management

2. Visualization: Real‑time process data, trends, alarms, diagnostics

3. Data Logging: Production counts, cycle times, error history

4. Recipe Storage: Up to 1000 molds/recipes (internal + USB)

5. Diagnostics: LED status, fault codes, online help

6. Firmware Update: Via USB or Ethernet (KAS IDE)

5. Environmental Conditions

• Operating Temperature: −10 °C … +55 °C

• Storage Temperature: −20 °C … +60 °C

• Relative Humidity: 5 % … 95 % RH (non‑condensing)

• Altitude: ≤ 2000 m

• Pollution Degree: 2

6. Compatibility

• Systems: KEBA K2‑200, CP033/Y, CP033/Z (Haitian injection machines)

• Power Supply: RS‑091, RS‑091/A (24 V DC)

• I/O Modules: SC‑102, PD‑242/A (K2 bus)

• Software: KEBA KAS IDE (KePlast, KeMotion)

7. Installation & Wiring

1. Disconnect 24 V DC before installation.

2. Cut cabinet door to panel dimensions; insert and fasten with mounting clips.

3. Connect 24 V DC (RS‑091/A) to rear power terminal.

4. Connect K2 bus cable to CP033/Y CPU.

5. Wire Ethernet/USB to programming PC or USB drive.

6. Power on; check Power LED ON and no errors.

8. Safety Instructions

• Install/service only by qualified electrical technicians.

• Do not open/modify the panel; voids warranty and risks electric shock.

• Operate only within 24 V DC, −10 … +55 °C rated range.

• Keep front panel clean; use mild detergent only (no solvents).

• Replace if display/keypad damaged, backlight fails, or water ingress.

9. Certifications

• CE (EN 61000‑6‑2, EN 61000‑6‑4)

• UL 508

• RoHS compliant