SEW BPS10-200-20-40-P-710 Detailed Product Description

SEW BPS10-200-20-40-P-710 is a plate heat exchanger / heat exchange unit under the BPS10 series of SEW, designed specifically for industrial fluid heat exchange, cooling/heating, and waste heat recovery scenarios. It features a brazed plate structure, offering efficient heat exchange, compact durability, and compatibility with various media.

I. Basic Information

Product Series: BPS10 Brazed Plate Heat Exchanger

Full Model: BPS10-200-20-40-P-710

Structural Type: Brazed Plate (Stainless Steel + Copper Brazing)

Application Domains:

Hydraulic oil / lubricating oil cooling

Industrial water / ethylene glycol heat exchange

Refrigeration systems, air conditioners, heat pumps

Air compressor residual heat recovery

Injection molding machines, die-casting machines, hydraulic stations cooling

Material: 316 stainless steel plates + copper brazing

Protection Grade: IP54 (External Interfaces)

Installation Method: Vertical / Horizontal wall-mounted, bracket installation

II. Model Meaning Interpretation

BPS10: Series Code, Brazed Plate Heat Exchanger (Brazed Plate Heat Exchanger), 10 is the plate sheet specification

200: Plate Sheet Quantity 200 pieces (Core Parameter of Heat Exchange Area)

20: Single Flow Channel Design / Plate Sheet Spacing 2.0 mm

40: Interface Size DN40 (1.5 inches)

P: Interface Type: Thread / Flange (Standard Connection)

710: Design Pressure Grade 10 bar / Temperature Grade 70℃ (or corresponding specification code)

III. Core Technical Parameters

1. Heat Exchange and Fluid Parameters

Heat Exchange Area: Approximately 12.5 m² (200 sheets × single sheet surface 0.0625 m²)

Design Pressure: 10 bar (1.0 MPa)

Test Pressure: 15 bar (1.5 MPa)

Operating Temperature: -20℃ ~ +70℃

Maximum Flow Rate:

Primary Side: ≤ 40 m³/h

Secondary Side: ≤ 40 m³/h

Medium Compatibility:

Water, ethylene glycol, heat transfer oil, mineral oil

Weak acids and weak bases, clean fluids without solid particles

2. Structure and Dimensions

Plate Material: 316 stainless steel (Corrosion-resistant)

Brazing Material: Copper (Standard)

Interface Specification: DN40 (G1.5"/ 1.5" Thread)

Overall Dimensions (Width × Height × Depth): Approximately 250 × 750 × 120 mm

Weight: Approximately 28 kg

Flow Channel Form: Zigzag-shaped turbulent plate sheets (High Heat Exchange Efficiency)

3. Performance Characteristics

Heat Exchange Efficiency: K Value 3000–5000 W/(m²・K) (Water - Water Conditions)

Pressure Loss: ≤ 0.5 bar (Rated Flow)

Pressure Drop Control: Low Flow Resistance, High Heat Exchange Coefficient

Sealing Reliability: Fully brazed structure, no gaskets, no leakage

Anti-Vibration / Impact: Industrial Grade, Adapted to Equipment Vibration Environment

IV. Functions and Advantages

1. High Efficiency Heat Exchange

Zigzag-shaped turbulent plate sheets: Strengthen turbulence, high heat exchange coefficient

Compact Structure: Volume is 1/3–1/5 of shell and tube type, saving space

High Temperature Approach Degree: Small temperature difference heat exchange, significant energy saving

2. Durable and Reliable

316 Stainless Steel: Corrosion-resistant, anti-water hammer, long service life

Full Copper Brazing: No aging, no leakage, no maintenance required

Wide Operating Conditions Adaptability: Stable operation under temperature / pressure fluctuations

3. Installation and Maintenance

Lightweight: Easy to transport, easy to install

Interface Standardization: DN40 Thread, quick connection

No Wear Parts: Stable operation over the long term, low maintenance cost

4. Application Compatibility Hydraulic station cooling: Oil-water heat exchange, controlling oil temperature

Exhaust heat from air compressors: Recovering heat to heat water / provide heating

Injection molding machines / die-casting machines: Cooling of molds / oil fluid

Central air conditioning / heat pumps: Cooling / heating, temperature control of chilled water / hot water

Industrial circulating water: Cooling / heating, temperature control

V. Typical operating parameters (water - water)

Primary side (hot fluid)

Flow rate: 20 m³/h

Inlet temperature: 60℃

Outlet temperature: 40℃

Secondary side (cold fluid)

Flow rate: 25 m³/h

Inlet temperature: 25℃

Outlet temperature: 45℃

Heat exchange capacity: Approximately 465 kW

VI. Selection and installation tips

Medium cleanliness: No particles, no fibers, no impurities (it is recommended to install a filter)

Flow rate control: 0.5–2.0 m/s (optimal heat exchange range)

Installation direction: Vertical / Horizontal, avoid air blockage

Anti-freezing protection: Add antifreeze or empty the system in low-temperature environments

VII. Order information

Model: BPS10-200-20-40-P-710

Standard equipment: Heat exchanger body, interface plugs

Optional: Supports, filters, temperature sensors, pressure gauges

VIII. Application scenarios

Hydraulic system cooling: Machines, presses, construction machinery

Exhaust heat recovery from air compressors: Screw compressors, centrifugal compressors for energy saving

Plastic machinery: Injection molding, extrusion, die-casting oil temperature control

HVAC: Commercial buildings, factory heating and cooling

Food / Chemical: Heating / cooling of clean fluids (non-corrosive)