TRICONEX 4101

Trident SIS 8‑Button / 8‑Indicator Manual Control Module (SIL3)

English Specification (No Images)

1. General Description

2. Basic Information

• Model: 4101

• Type: Manual Control & Indication Module (Trident SIS)

• Front Panel: 8 momentary pushbuttons, 8 multi‑color LEDs

• System Compatibility: Trident (Triconex SIS)

• Safety Level: SIL3 (IEC 61508 / IEC 61511)

• Architecture: TMR, 2oo3 voting

• Certifications: TUV, FM, CSA, ATEX/IECEx

• Status: In production & supported

3. Key Features

• 8 operator pushbuttons (momentary, configurable: ESD reset, valve open/close, trip acknowledge)

• 8 LED indicators (green/yellow/red: run, fault, active, alarm)

• TMR fault tolerance, 2oo3 voting on all I/O

• SIL3 safety integrity for safety‑critical manual actions

• Redundant button/LED circuits, no single point of failure

• Hot‑swappable in Trident chassis

• Built‑in diagnostics: button fault, LED fault, TMR mismatch

• Front‑panel labeled for quick operator recognition

4. Technical Parameters

4.1 Front‑Panel Controls & Indicators

• Pushbuttons: 8 × momentary, 24VDC logic, TMR‑voted

• LEDs: 8 × multi‑color (green/yellow/red), 24VDC

• Button Function: Configurable (TriStation): ESD reset, trip ack, valve cmd, etc.

• LED Function: RUN (green), FAULT (red), ACTIVE (yellow), ALARM (red)

4.2 Safety & Isolation

• Voting: 2‑out‑of‑3 (2oo3)

• Fault coverage: ≥99%

• Isolation: 1,500VDC (field‑to‑backplane)

• Diagnostics: button open/short, LED fault, TMR mismatch

4.3 Environmental

• Operating temp: –40°C to +70°C

• Storage temp: –40°C to +85°C

• Humidity: 5%–95%, non‑condensing

• Vibration: 5–200Hz, 2G

4.4 Power & Mechanical

• Backplane: 5VDC

• Power consumption: ≤15W

• Dimensions: Full‑height Trident module (178 × 127 × 63mm)

• Weight: ~0.8kg

5. Function

• Operator Input: 8 pushbuttons send TMR‑voted commands to Trident SIS (e.g., ESD reset, valve control, trip acknowledge)

• Status Display: 8 LEDs show system/channel status (run, fault, active, alarm)

• Safety Voting: All button/LED signals are 2oo3 voted to eliminate single‑point failures

• Fail‑Safe: On module fault, all outputs de‑energize; LEDs indicate fault

6. LED Indicators (Front Panel)

• RUN (Green): Module healthy, TMR voting OK

• FAULT (Red): Module/button/LED fault or TMR mismatch

• CH0–CH7 (Multi‑color): Button active (yellow), alarm (red), normal (green)

7. Installation & Configuration

1. Insert into full‑height Trident I/O slot

2. Connect backplane power (5VDC)

3. Configure button/LED functions via TriStation 1131

4. Label front panel per site procedure

5. Verify TMR voting and diagnostics

8. Typical Applications

• ESD emergency shutdown reset & acknowledge

• Safety valve manual open/close commands

• Fire & gas system alarm acknowledge

• Critical pump/compressor trip reset

• SIL3 safety system operator interface

9. Maintenance

• Hot swap faulty modules online

• Inspect pushbuttons/LEDs annually

• Test button/LED diagnostics periodically

• Review fault/SOE logs

10. Compatibility

• Chassis: Trident full‑height slots

• Software: TriStation 1131

• Compatible processors: Trident Main Processor (MP) modules