Basic Specifications

• Part Number: A06B-6050-K115

• Type: Signal line connector kit (straight type)

• Compatible Series: A06B-60 series servo amplifiers/velocity control units

• Weight: Approximately 0.07 kg

• Status: Discontinued by manufacturer (new surplus/ refurbished available)

• Warranty: 1–2 years (supplier-dependent)

• Material: Industrial-grade plastic housing, tin-plated copper contacts

• Connector Style: Straight, crimp/solder termination

Key Features

• Precision Signal Transmission: Optimized for encoder and low-voltage control signals, minimizing electromagnetic interference (EMI) and ensuring stable data communication.

• Durable Construction: Industrial-grade materials resist vibration, temperature fluctuations, and common industrial contaminants (dust, oil mist).

• Easy Installation: Straight-type design simplifies wiring and routing in tight cabinet spaces; kit includes all necessary pins, housings, and seals.

• System Compatibility: Directly compatible with FANUC A06B-6050 series velocity control units and associated servo motors/CNC systems.

• Reliable Connectivity: Secure locking mechanism prevents accidental disconnection due to vibration or cable pull.

Application Scope

• FANUC Servo Systems: A06B-60 series servo amplifiers/velocity control units.

• CNC Machine Tools: Legacy CNC lathes, milling machines, and machining centers (X/Y/Z axis servo connections).

• Industrial Automation: Retrofit projects for older FANUC-based automation equipment requiring encoder/control signal connectivity.

• Signal Wiring: Encoder feedback lines, analog command lines (0–10V), and servo enable/alarm signal connections.

Installation Instructions

1. Pre-Installation: Disconnect all power to the servo drive and CNC controller to avoid electric shock or component damage.

2. Cable Preparation: Strip signal cable insulation to the recommended length (per FANUC wiring standards); avoid damaging conductor strands.

3. Contact Termination: Crimp or solder cable conductors to the connector pins; ensure proper insulation and no exposed metal.

4. Housing Assembly: Insert terminated pins into the connector housing until fully seated; verify lock tabs engage securely.

5. Connection: Align the straight connector with the mating port on the servo drive/controller; push firmly until the locking mechanism clicks.

6. Cable Routing: Secure cables with cable ties to avoid tension or vibration-induced stress; maintain separation between signal and power cables (≥10 cm) to reduce EMI.

Wiring Recommendations

• Use FANUC-approved shielded cables for encoder and control signals; ground shields at both ends for maximum noise suppression.

• Match connector pinouts to FANUC’s official wiring diagrams for the A06B-60 series; avoid cross-wiring or reversed polarity.

• Torque terminal screws (if applicable) to the specified torque to prevent loose connections.

• Label all cables and connectors for easy maintenance and troubleshooting.

Safety & Maintenance

• Only qualified electrical personnel should install or service the connector kit.

• Inspect connectors quarterly for signs of wear, corrosion, or loose contacts; replace damaged components immediately.

• Avoid exposing the connector to excessive moisture, corrosive gases, or extreme temperatures (operating range: 0°C to +40°C).

• Do not modify or alter the connector kit’s structure; unauthorized modifications void compatibility and may damage connected equipment.