2. Technical Specifications

• Rated Voltage: AC 200V class

• Insulation Class: Class F

• Cooling Method: Natural air cooling

• Operating Ambient Temperature: 0℃ ~ +55℃

• Storage Temperature Range: -20℃ ~ +70℃

• Relative Humidity: 10% ~ 90%, non-condensing

• Protection Grade: Industrial dust-proof and oil-proof

• Installation Method: Standard flange mounting

• EMC Performance: Industrial high anti-interference level

• Continuous Operation: Supports 24-hour uninterrupted stable operation

3. Product Features

1. Low-inertia rotor design, fast dynamic response and excellent acceleration & deceleration performance.

2. High power density with strong overload capacity and stable continuous torque output.

3. Built-in high-resolution encoder for high-precision closed-loop positioning control.

4. Optimized low cogging torque, smooth micro-feed and low-speed operation without crawling or jitter.

5. Industrial-grade insulation and fully sealed structure, excellent dustproof, oil resistance and long service life.

6. #0100 customized parameter version, perfectly compatible with original FANUC drive, no parameter modification required for direct replacement.

4. Installation Instructions

1. Cut off the total power supply of machine tool and servo system before installation.

2. Inspect motor appearance, flange surface, shaft and keyway for no damage, deformation or rust.

3. Fix the motor on mechanical mounting surface with standard bolts, tighten evenly to ensure mounting flatness.

4. Install the coupling correctly, strictly control coaxiality between motor shaft and load shaft to reduce vibration and abnormal wear.

5. Connect motor power cable and encoder cable strictly according to wiring specifications.

6. Arrange cables reasonably, avoid sharp bending, heavy extrusion and crossing with high-voltage lines.

7. After installation, recheck all mechanical fastening and wiring connections.

8. Power on the system, complete servo initialization, origin calibration and no-load test operation.

5. Operation Precautions

1. Do not operate beyond rated voltage, speed and load range to prevent motor overheating and burnout.

2. Avoid frequent forward and reverse jogging in a short time to reduce overcurrent impact and thermal overload.

3. Do not use in environments with heavy dust, oil mist, corrosive gas and water splash.

4. Keep reliable equipment grounding to prevent electric leakage and electromagnetic interference.

5. Do not disassemble motor shell, encoder and internal components without professional authorization.

6. Stop operation and cut off power immediately if abnormal noise, vibration, overheating or servo alarm occurs.

6. Maintenance and Storage

7. Quality Statement

1. A06B-0116-B203#0100 complies with FANUC industrial manufacturing standards and electrical safety specifications.

2. All products pass dynamic balance test, performance test and aging test before delivery.

3. This manual is applicable to original and compatible replacement parts of A06B-0116-B203#0100 servo motor.