A06B-0115-B503
Description
2. Technical Specifications
Rated voltage: AC 200V class
Insulation class: Class F
Cooling method: Natural air cooling
Operating ambient temperature: 0℃ ~ +55℃
Storage temperature range: -20℃ ~ +70℃
Relative humidity: 10% ~ 90%, non-condensing
Protection grade: Industrial dust-proof & oil-proof
Brake type: DC power-off holding brake
Installation method: Flange mounting
EMC: Industrial high anti-interference level
3. Product Features
Integrated power-off brake design, reliable shaft locking after power cut, excellent anti-drop and position holding performance.
Low-inertia rotor structure, fast response, outstanding acceleration and deceleration capability.
High power density and strong overload capacity, stable torque output under variable load.
Built-in high-resolution encoder, supports high-precision closed-loop positioning and repeated accuracy.
Optimized low cogging torque, smooth micro-feed and low-speed operation without jitter.
Fully sealed industrial structure, good dustproof, oil resistance and long service life; compatible with original FANUC drive for direct replacement.
4. Installation Instructions
Cut off all power of machine tool and servo system before installation.
Inspect motor appearance, flange, shaft and keyway for no damage, deformation or rust.
Fix motor on the mechanical mounting surface with standard bolts, fasten evenly to ensure flatness.
Install coupling with strict coaxiality control to reduce vibration, noise and abnormal wear.
Connect power cable, encoder cable and brake control cable strictly per wiring diagram.
Arrange cables properly, avoid sharp bending, heavy extrusion and crossing with high-voltage lines.
Recheck all mechanical fastenings and wiring connections.
Power on, perform servo initialization, origin calibration and no-load test run.
5. Operation Precautions
Do not exceed rated voltage, speed and load range to avoid motor overheating and burnout.
Avoid frequent rapid forward/reverse jogging to prevent overcurrent impact and thermal overload.
Do not apply in environments with heavy dust, oil mist, corrosive gas or water splash.
Ensure reliable equipment grounding to prevent electric leakage and electromagnetic interference.
Do not disassemble motor, brake assembly and encoder without professional authorization.
Stop operation and cut off power immediately if abnormal noise, vibration, overheating or shaft slipping occurs.
6. Maintenance and Storage
7. Quality Statement
A06B-0115-B503 complies with FANUC industrial manufacturing standards and electrical safety specifications.
All units pass dynamic balance test, performance test, brake holding test and aging test before delivery.
This manual is applicable to original and compatible replacement parts of A06B-0115-B503 servo motor.
Get a Quote