Part Number: A06B-0033-B075#7008

English Version (No Images)

1

2. Technical Specifications

• Rated working voltage: AC 200V class

• Insulation class: Class F

• Cooling method: Natural air cooling

• Operating ambient temperature: 0℃ ~ +55℃

• Storage temperature range: -20℃ ~ +70℃

• Relative humidity: 10% ~ 90%, non-condensing

• Protection grade: Industrial dust-proof and oil-proof, adapted to complex workshop environment

• Installation type: Flange mounting

• Overall insulation performance: Complies with international industrial electrical safety standards

3. Product Features

1. High power density design, with strong overload capacity and stable continuous torque output.

2. Built-in high-resolution encoder, support high-precision closed-loop control and repeat positioning.

3. Optimized low cogging torque design, smooth low-speed operation without crawling and jitter.

4. Industrial-grade insulation and sealing structure, good dustproof, oil resistance and long service life.

5. Compact and standardized outline dimension, convenient for mechanical installation and alignment.

6. Perfect matching with FANUC servo drive system, fast response, easy parameter debugging and stable operation.

4. Installation Instructions

1. Cut off the total power supply of machine tool and servo system before installation.

2. Inspect the motor appearance, flange surface, shaft and keyway for no damage, deformation or rust.

3. Fix the motor on the mechanical mounting base with standard bolts, tighten evenly to ensure mounting flatness.

4. Install the coupling correctly, guarantee coaxiality between motor shaft and load shaft to reduce vibration and abrasion.

5. Connect motor power cable and encoder cable strictly in accordance with wiring regulations, ensure firm and correct connection.

6. Arrange cables reasonably, avoid sharp bending, heavy extrusion and parallel crossing with high-voltage lines.

7. After installation, recheck all mechanical fastenings and wiring connections.

8. Power on the system, complete servo parameter initialization, origin calibration and no-load test operation.

5. Operation Precautions

1. It is forbidden to operate beyond rated voltage, rated speed and rated load, to prevent motor overheating and burnout.

2. Avoid frequent forward and reverse jogging in a short time, so as not to cause overcurrent impact and thermal overload.

3. Do not use in environments with heavy dust, oil mist, corrosive gas and water splash.

4. Keep reliable grounding for motor and equipment to avoid electric leakage and electromagnetic interference.

5. Do not disassemble the motor shell, encoder and internal structure without professional permission.

6. Stop operation and cut off power immediately if abnormal noise, vibration, overheating or servo alarm occurs.

6. Maintenance and Storage

7. Quality Statement

1. A06B-0033-B075#7008 complies with FANUC industrial manufacturing standards and electrical safety specifications.

2. All products pass dynamic balance test, performance test and aging test before delivery.

3. This manual is applicable to original and compatible replacement parts of A06B-0033-B075#7008 servo motor.