Part Number: A06B-0032-B175#7008

English Version (No Images)

2. Technical Specifications

• Rated voltage: AC 200V level

• Insulation class: Class F

• Cooling method: Natural air cooling

• Operating ambient temperature: 0℃ ~ +55℃

• Storage temperature range: -20℃ ~ +70℃

• Relative humidity: 10% ~ 90%, non-condensing

• Protection grade: Industrial dust-proof and oil-proof, suitable for workshop harsh environment

• Brake type: DC power-off holding brake

• Installation method: Standard flange mounting

• Insulation performance: Complies with international industrial electrical safety standards

3. Product Features

1. Integrated power-off brake design, automatic locking when power off, effectively preventing axis sliding and falling.

2. High torque density, strong overload capacity, stable output at low and high speed.

3. Built-in high-resolution encoder, realizing high-precision closed-loop positioning control.

4. Optimized low-cogging torque design, smooth operation without crawling at low speed.

5. Industrial-grade insulation and sealing structure, excellent dust proof, oil resistance and long service life.

6. Perfect compatibility with FANUC servo drive system, fast response, easy debugging and stable dynamic performance.

4. Installation Instructions

1. Cut off the main power supply of machine tool and servo system before installation.

2. Inspect motor appearance, flange, shaft, keyway and brake structure for no damage or deformation.

3. Fix the motor on the mechanical mounting surface with standard bolts, tighten evenly to keep horizontal and vertical precision.

4. Install the coupling correctly, ensure good coaxiality between motor shaft and load shaft to avoid eccentric vibration.

5. Connect motor power cable, encoder cable and brake control cable strictly according to wiring specifications.

6. Arrange cables reasonably, avoid sharp bending, heavy extrusion and crossing with high-voltage lines.

7. After installation, recheck mechanical fastening and all wiring connections.

8. Power on the system, perform servo initialization, origin calibration and no-load running test.

5. Operation Precautions

1. Do not run the motor beyond rated voltage, speed and load range, to avoid overheating and burnout.

2. Avoid frequent forward and reverse jogging in a short time, prevent overcurrent impact.

3. Do not use in environments with heavy dust, oil mist, corrosive gas and water splash.

4. Keep reliable equipment grounding to prevent electric leakage and electromagnetic interference.

5. Do not disassemble motor, brake assembly and encoder without professional authorization.

6. If abnormal noise, vibration, overheating, shaft slipping or system alarm occurs, stop operation and cut off power immediately for inspection.

6. Maintenance and Storage

7. Quality Statement

1. A06B-0032-B175#7008 complies with FANUC industrial manufacturing standards and electrical safety specifications.

2. All units pass dynamic balance test, performance detection, brake holding test and aging test before delivery.

3. This manual is applicable to original and compatible replacement parts of A06B-0032-B175#7008 servo motor.