2. Technical Specifications

• Rated voltage: AC 200V class

• Rated insulation class: Class F

• Operating ambient temperature: 0℃ ~ +55℃

• Storage temperature range: -20℃ ~ +70℃

• Relative humidity: 10% ~ 90%, non-condensing

• Protection grade: Industrial dust-proof and oil-proof structure, adapting to workshop harsh environment

• Cooling method: Natural air cooling

• Installation mode: Standard flange mounting

• Insulation performance: Complies with international industrial motor safety standards

3. Product Features

1. High-power density design, output stable rated torque and high overload capacity.

2. High-resolution built-in encoder, realizing high-precision positioning and closed-loop control.

3. Low cogging torque design, smooth operation at low speed without crawling phenomenon.

4. Industrial-grade insulation and waterproof structure, good dustproof, oil resistance and long service life.

5. Compact structure, easy installation and alignment, compatible with standard mechanical mounting dimensions.

6. Perfect matching with FANUC servo drive system, fast response, stable dynamic performance and easy parameter debugging.

4. Installation Instructions

1. Cut off the total power supply of the machine tool and servo system before installation.

2. Check the motor appearance, shaft diameter, flange size and keyway for no damage or deformation.

3. Align the motor flange with the mechanical mounting surface, fix the mounting bolts evenly and lock firmly.

4. Align the motor shaft with the load shaft, install coupling correctly, ensure coaxiality to avoid eccentric vibration.

5. Connect power cable and encoder cable strictly according to wiring specification, ensure firm connection and correct phase sequence.

6. Arrange cables reasonably, avoid sharp bending, extrusion and crossing with high-voltage power lines.

7. After installation is completed, check all mechanical fixation and wiring connection again.

8. Power on the system, perform servo initialization, origin calibration and no-load test operation.

5. Operation Precautions

1. Do not operate beyond the rated voltage, rated speed and load range, to avoid motor overload burnout.

2. Prohibit frequent forward and reverse jog operation in a short time, prevent overcurrent and overheating.

3. Do not use in environments with heavy dust, oil mist, corrosive gas and water splashing.

4. Ensure good grounding of motor and equipment, prevent static interference and electric leakage risk.

5. Do not disassemble the motor, encoder and internal structure without professional authorization.

6. If abnormal noise, vibration, overheating or alarm occurs during operation, stop using immediately and cut off power for inspection.

6. Maintenance and Storage

7. Quality Statement

1. A06B-0032-B075#7008 complies with FANUC motor industrial manufacturing standards and electrical safety specifications.

2. All products pass dynamic balance test, performance test and aging test before delivery.

3. This manual is applicable to original and compatible replacement parts of A06B-0032-B075#7008 servo motor.