D0137KU
May 13, 2026

D0137KU

1. General Information Model: D0137KU(FBM09) Manufacturer: Foxboro(Schneider Electric / Invensys) Type: Analog Output Module(4-channel) System: I/A Series DCS(100 Series Hardware) Status: End-of-Life(EOL);Refurbished/Used Spare Only Origin: United States 2. Specifications(Electrical & Performance) Output Channels: 4 isolated analog outputs Signal Range: 4–20 mA DC(standard);0–20 mA(optional) Resolution: 12-bit Accuracy: ±0.1% of span(25°C) Load Capacity: 0–750 Ω(at 24 VDC supply) Update Rate: 100 ms(typical) Isolation: 250 VAC(channel-to-channel & channel-to-ground) Power Supply: +24 VDC ±10%(backplane-fed) Power Consumption: ≤ 6 W Operating Temperature: 0°C to +55°C Storage Temperature: −40°C to +85°C Humidity: 5%–95% RH(non-condensing) Dimensions(W×H×D): 45 mm × 102 mm × 104 mm Weight: ~0.3 kg

Description

1. General Information

  • Model: D0137KU(FBM09)

  • Manufacturer: Foxboro(Schneider Electric / Invensys)

  • Type: Analog Output Module(4-channel)

  • System: I/A Series DCS(100 Series Hardware)

  • Status: End-of-Life(EOL);Refurbished/Used Spare Only

  • Origin: United States

2. Specifications(Electrical & Performance)

  • Output Channels: 4 isolated analog outputs

  • Signal Range: 4–20 mA DC(standard);0–20 mA(optional)

  • Resolution: 12-bit

  • Accuracy: ±0.1% of span(25°C)

  • Load Capacity: 0–750 Ω(at 24 VDC supply)

  • Update Rate: 100 ms(typical)

  • Isolation: 250 VAC(channel-to-channel & channel-to-ground)

  • Power Supply: +24 VDC ±10%(backplane-fed)

  • Power Consumption: ≤ 6 W

  • Operating Temperature: 0°C to +55°C

  • Storage Temperature: −40°C to +85°C

  • Humidity: 5%–95% RH(non-condensing)

  • Dimensions(W×H×D): 45 mm × 102 mm × 104 mm

  • Weight: ~0.3 kg

3. Functional Description

4-channel analog output module for I/A Series 100 Series DCS;converts digital control signals to 4–20 mA analog outputs for driving valves, actuators, and field transmitters。

Fault detection: Short-circuit, open-load, and over-range diagnostics;FAULT LED indication。

Redundancy: Supports redundant module pairing(1:1)with bumpless transfer<50 ms。

4. Installation & Wiring

Mounting: 1-slot, standard 19” rack or DIN rail(I/A Series 100 Series baseplate)。

Hot-swap: Yes(online replacement without shutdown)。

Field Wiring: Shielded twisted pair(STP),18–22 AWG;single-end grounding;max length 1,000 m。

Terminals:

CH1–CH4: Output +/−

COM: Common ground

SHLD: Shield drain

5. LED Indicators(Front Panel)

PWR(Green): On = Power OK

RUN(Green): On = Module active;Blink = Communication OK

FAULT(Red): On = Fault(output error/comm loss);Blink = Diagnostic alarm

6. Compatibility & Replacement

Compatible With: I/A Series CP10/CP30/CP60 Controllers;100 Series Baseplates。

Direct Replacement: FBM09(D0137KU)

Modern Equivalent: FBM237(P0926GY,200 Series,4–20 mA,12-bit,Ethernet Fieldbus)

7. Manual Reference

Official Manual: I/A Series 100 Series Hardware Manual(Doc: PSS 1-1A1)

Datasheet: Foxboro FBM09 Analog Output Module(D0137KU)

Foxboro29.jpg


Get a Quote