140DDM69000

Modicon Quantum 125VDC Mixed I/O Module

4 In / 4 Out, High‑Voltage, Solid State, Standard Non‑Coated

1. General Description

• Manufacturer: Schneider Electric

• Series: Modicon Quantum 140 Series

• Module Type: 125VDC Mixed I/O (Sink Input / Source/Sink Output)

• Inputs: 4 points (1 group × 4), sink logic

• Outputs: 4 points (1 group × 4), solid‑state, source/sink selectable

• Slot: 1 slot, hot‑swappable

• Coating: Standard non‑coated

• Weight: ~0.3 kg

• Application: High‑voltage DC signal acquisition and power actuator control (24–125VDC)

2. Electrical Specifications

Inputs (4 points, 125VDC)

• Rated Voltage: 125 VDC

• Operating Range: 19.2–156.2 VDC (with ripple)

• Logic 0: ≤10 VDC

• Logic 1: ≥40 VDC

• Input Current: ≥2 mA (ON)

• Response Time: 0.5 ms / 1.5 ms (filter selectable)

• Isolation: 1780 Vrms 1 minute (I/O ↔ bus)

Outputs (4 points, Solid‑State)

• Rated Voltage: 24–125 VDC (19.2–156.2 VDC max)

• Per Point Current: 4 A

• Module Total Max: 16 A

• Voltage Drop: ≤0.75 V @ 4 A

• Response Time: 0.5 ms / 1.5 ms (filter selectable)

• Protection: Overcurrent, transient suppression

• Surge: 30 A / 500 ms per point (absolute max)

• Leakage Current: ≤1.2 mA @ 150 VDC

• Load Capacitance: ≤0.1 µF @ 150 VDC

Backplane Power

• Backplane Current: 350 mA

3. LED Indicators

• IN0–IN3 Green: Input channel status; Red: Input fault

• OUT0–OUT3 Green: Output ON status; Red: Output fault

• ACTIVE Green: Module communication OK

• FAULT Red: Module or I/O fault

4. Environmental Conditions

• Operating Temp: 0°C to +60°C

• Storage Temp: −40°C to +85°C

• Humidity: 5%–95%, non‑condensing

• Altitude: ≤2000 m (derate above 2000 m)

• ESD: Contact 4 kV; Air 8 kV

• Protection: IP20

5. Mechanical & Wiring

• Dimensions: 35 × 122 × 52 mm

• Terminals: Screw type

• Wire Size: 0.5–2.5 mm²

• Common: 1 common for 4 inputs; 1 common for 4 outputs

6. Addressing

• Software: Unity Pro, Concept, ProWORX 32

• Inputs: %I0–%I3

• Outputs: %Q0–%Q3

7. Model Difference

• 140DDM69000: Standard non‑coated (normal environments)

• 140DDM69000C: Conformal coated (harsh environments: humid, dusty, corrosive)

8. Certifications