140DDM39000C

Modicon Quantum 24VDC Mixed I/O Module

16 In / 8 Out, Solid State, Conformal Coated

1. General Description

• Manufacturer: Schneider Electric

• Series: Modicon Quantum 140 Series

• Module Type: 24VDC Mixed I/O (Sink Input / Sink Output)

• Inputs: 16 points (2 groups × 8)

• Outputs: 8 points (2 groups × 4), solid state

• Slot: 1 slot, hot‑swappable

• Coating: Conformal coated (humidity, dust, corrosion resistance)

• Weight: ~0.45 kg

• Application: Harsh industrial environments (chemical, water/wastewater, offshore, high humidity/dust)

2. Electrical Specifications

Inputs (16 points, 24VDC)

• Rated Voltage: 24 VDC

• Operating Range: 18–30 VDC

• Logic 0: −3 to 5 VDC

• Logic 1: 15–30 VDC

• Input Current: ≥2 mA (ON); ≤0.5 mA (OFF)

• Input Impedance: 2.5 kΩ

• Response Time: ≤1 ms

• Isolation: 500 Vrms 1 minute between groups

Outputs (8 points, Solid‑State Sink)

• Rated Voltage: 19.2–30 VDC (24 VDC typical)

• Per Point Current: 0.5 A

• Per Group Max: 2 A (2 groups × 4)

• Module Total Max: ≤4 A

• Voltage Drop: 0.4 V @ 0.5 A

• Response Time: ≤1 ms (0→1, 1→0)

• Protection: 5 A group fuse + transient suppression

• Surge: 5 A / 500 µs per point

• Inductive Load: 500 mH @ 4 Hz

• Leakage Current: ≤0.4 mA @ 30 VDC

Backplane Power

• Backplane Current: 330 mA

• Power Consumption: 1.75 W + 0.36 W×active inputs + 1.1 W×total output current

3. LED Indicators

• IN0–IN15 Green: Input channel status

• OUT0–OUT7 Green: Output channel status

• ACTIVE Green: Module communication OK

4. Environmental Conditions (Coated Enhanced)

• Operating Temp: 0°C to +60°C

• Storage Temp: −40°C to +85°C

• Humidity: 5%–95%, non‑condensing

• Altitude: ≤2000 m (derate above 2000 m)

• ESD: Contact 4 kV; Air 8 kV

• Protection: IP20; conformal coated for resistance to moisture, dust, and corrosive atmospheres

5. Mechanical & Wiring

• Dimensions: 35 × 122 × 52 mm

• Terminals: Screw type

• Wire Size: 0.5–2.5 mm²

• Independent common per group

6. Addressing

• Software: Unity Pro, Concept, ProWORX 32

• Inputs: %I0–%I15

• Outputs: %Q0–%Q7

7. Model Difference

• 140DDM39000: Standard non‑coated (normal environments)

• 140DDM39000C: Conformal coated (harsh environments: humid, dusty, corrosive)

8. Certifications