Product Specification: 8V1016.001-2

1. General Description

2. Key Features

• Modular Design: Flexible configuration with 3 slots for plug-in interface modules (e.g., CAN, POWERLINK, EnDat encoder).

• Integrated Components:

  • Built-in line filter (EN 61800-3, Category C3) for EMC compliance.

  • Integrated braking resistor for efficient dynamic braking.

  • On-board electronic safe restart inhibit (functional safety).

  • Protective PCB Coating: For enhanced resistance to dust, humidity, and corrosive environments.

• High Precision Control: Digital signal processing with advanced control algorithms and short cycle times.

• Power Failure Monitoring: System for automated active braking during power loss.

• Comprehensive Protection: Overload, short-circuit, and ground fault protection.

• Certifications: CE, cULus (E225616), EAC, KC, UKCA, and Functional Safety certified.

3. Electrical Specifications

• Mains Input Voltage: 3 x 400-480 VAC ±10%

• Supply Frequency: 50 / 60 Hz ±4%

• Permissible Network Configurations: TT, TN

• Output Current (Continuous): 1.6 A_eff

• Peak Current: Approx. 5 A_eff (short duration)

• Rated Power: 0.7 kW

• Input Power (Max.): 2.1 kVA

• Inrush Current: 2 A (at 400 VAC)

• Switch-on Interval: > 10 seconds

• Power Dissipation (Nominal, No Braking): 110 WB& R Industrial Automation

• DC Bus Connection:

  • DC Bus Capacitance: 165 µFB& R Industrial Automation

• 24 VDC Control Supply:

  • Input Voltage: 24 VDC (+25% / -20%)B& R Industrial Automation

  • Input Capacitance: 5600 µFB& R Industrial Automation

  • Current Consumption: Max. 1.47 A + Current for motor holding brakeB& R Industrial Automation

• Switching Frequencies: 5 / 10 / 20 kHz (Nominal: 10 kHz)

• Max. Output Frequency: 598 Hz

• Max. Motor Cable Length: 15 m

4. Mechanical Specifications

• Dimensions (W x H x D): 58.5 mm x 257 mm x 220 mm

• Weight: Approx. 2.5 kg

• Protection Rating: IP20 (per EN 60529)

• Mounting: Vertical installation (recommended)

• Cooling Method: Convection cooling

5. Environmental Specifications

• Operating Temperature: 0°C to +40°C (nominal), up to +55°C (with derating)

• Storage/Transport Temperature: -25°C to +70°C

• Relative Humidity: 5% to 85% (operating, non-condensing); 5% to 95% (storage/transport)

• Pollution Degree: 2 (per EN 61800-5-1)

• Overvoltage Category: II (per EN 61800-5-1)

• Maximum Installation Altitude: 2000 m above sea level (with derating above 500 m)

6. Certifications & Approvals

• CE (Conformité Européenne)

• cULus (E225616, Power conversion equipment)

• EAC (Eurasian Conformity)

• KC (Korea Certification)

• UKCA (UK Conformity Assessed)B& R Industrial Automation

• Functional Safety Certified

7. Ordering Information

• Part Number: 8V1016.001-2

• Note: This product has been discontinued by the manufacturer.

• Standard Delivery Includes: Servo drive unit with integrated filter, braking resistor, safety functions, and protective PCB coating. Documentation and certification files are available for download from B&R's website.