1. Product Overview

2. Technical Specifications

• Part Number: 02-766070

• Structural Type: Integrated precision component

• Operating Temperature Range: -10°C to +55°C

• Storage Temperature Range: -25°C to +65°C

• Working Humidity: 15%–90% RH, non-condensing

• Installation Mode: Positioning mounting / fixed assembly

• Performance Grade: Industrial standard grade

• Characteristics: Wear resistance, oxidation resistance, high structural stability

3. Main Features

1. Adopts high-quality industrial raw materials and precision machining technology.

2. Standard dimension tolerance, good interchangeability for replacement.

3. Optimized structural design, shockproof and not easy to deform.

4. Simple installation and positioning, no complicated debugging required.

5. Good environmental adaptability, dust-proof and anti-corrosion.

6. Low daily maintenance cost, convenient for routine inspection and after-sales replacement.

4. Installation Instructions

1. Before installation, inspect the product appearance for cracks, deformation, scratches or surface defects.

2. Clean the mounting position thoroughly to remove dust, debris and foreign particles.

3. Align the product with the reserved installation position accurately according to assembly requirements.

4. Fix and fasten the product firmly to ensure no offset, looseness or assembly gap deviation.

5. After installation, recheck the fitting status and overall stability before putting into operation.

5. Operation Guidelines

1. Use the product strictly within the rated temperature, humidity and load range.

2. Avoid severe impact, extrusion, falling and artificial scratch during use.

3. Do not operate beyond the limit working conditions to prevent performance attenuation or damage.

4. Keep away from corrosive liquid, oily pollution and high-dust humid environment.

5. Stop using immediately if abnormal vibration, noise or matching abnormality occurs.

6. Maintenance and Daily Care

1. Clean surface dust and impurities regularly to keep the product dry and ventilated.

2. Periodically check the fastening condition and assembly position, retighten loose parts in time.

3. Do not use corrosive chemical detergent to wipe the product surface.

4. For long-term unused storage, place in a dry, cool and well-ventilated indoor environment.

5. Do not disassemble or modify the product privately; all maintenance shall be handled by professional technicians.

7. Common Troubleshooting

• Assembly jamming: Check for foreign matter or position misalignment, realign and reinstall.

• Loose fitting during operation: Re-fasten the fixing parts and check for surface wear.

• Surface oxidation and rust: Improve storage and working environment; replace the part if it affects normal use.

8. Safety Precautions

1. Prohibit application in flammable, explosive and strong corrosive environments.

2. Non-professional personnel are not allowed to disassemble, cut or refit the product.

3. Follow standard industrial assembly procedures during installation and application.

4. Avoid incorrect installation causing abnormal operation of supporting equipment.

5. Once abnormal overheating, peculiar smell or failure occurs, stop use immediately and contact the supplier for technical support.

9. Packing List

• Main component 02-766070 × 1

• Installation auxiliary accessories

• Product Instruction Manual