1. Product Overview

2. Technical Parameters

• Model: 010-040 + CON021

• Combination Type: Matched assembly set

• Working Temperature: -10℃ ~ +50℃

• Storage Temperature: -20℃ ~ +60℃

• Working Humidity: 10%~90% RH, non-condensing

• Installation Method: Positioning assembly / fixed mounting

• Application: Mechanical equipment matching, industrial assembly, standard system supporting

• Performance Characteristic: Wear-resistant, anti-oxidation, high stability

3. Main Features

1. Original matching design of 010-040 and CON021, perfect assembly without modification.

2. Made of high-strength raw materials, precision processing, durable and deformation-resistant.

3. Compact overall structure, save installation space, suitable for limited layout environment.

4. Standard interface size, good interchangeability for replacement and maintenance.

5. Dustproof, anti-corrosion and anti-interference design, adapt to complex working conditions.

6. Simple assembly steps, no complex debugging required after installation.

4. Installation Guide

1. Before installation, check 010-040 and CON021 respectively for surface damage, crack or deformation.

2. Clean the installation position to remove dust, sundries and foreign matters.

3. Align 010-040 with CON021 according to the assembly mark, complete embedded matching.

4. Install and fix the combined set in the reserved position, ensure firm connection and no looseness.

5. After assembly, check the matching gap and installation accuracy to confirm in place.

5. Operation Instructions

1. Put into use only after correct assembly and fixed installation.

2. Operate within rated temperature, humidity and load range, do not overuse.

3. Avoid strong impact, extrusion and collision during equipment running.

4. Keep away from corrosive liquid, high humidity and heavy dust environment.

5. If abnormal vibration, noise or matching deviation occurs, stop using immediately.

6. Daily Maintenance

1. Regularly clean surface dust and dirt to keep the product dry and ventilated.

2. Periodically inspect the matching state of 010-040 and CON021, tighten loose parts timely.

3. Do not use corrosive solvent to wipe the product surface.

4. For long-term standby, store the whole set in dry, cool and ventilated place.

5. Do not disassemble the combined set privately; maintenance must be operated by professional personnel.

7. Troubleshooting

• Poor assembly fit: Check if there is foreign matter or position deviation, re-align and reinstall.

• Loose during operation: Re-fasten the fixing parts, check wear of matching surface.

• Abnormal running noise: Check assembly clearance and deformation, adjust or replace parts in time.

8. Safety Precautions

1. Do not use in flammable, explosive and strong corrosive environment.

2. Non-professionals are not allowed to disassemble, modify or refit the product.

3. Strictly follow installation standard and assembly process.

4. Keep away from children to avoid accidental damage or safety risk.

5. In case of abnormal heat, peculiar smell or fault, stop use and contact after-sales support at once.

9. Packing List

• 010-040 Main Part × 1

• CON021 Matching Accessory × 1

• Installation Fittings

• Official Instruction Manual