Product Description

I. Core Parameters (D633-442B-R16KO1DOVSS2 Official Standard)

1. Basic Specifications

Model: D633-442B-R16KO1DOVSS2 (NG6 Direct Acting Servo Valve)

Flow Specification: 40 L/min @ Δp=35 bar

Pressure Rating:

P/A/B: 350 bar

T/Y: 350 bar (with Y port high-pressure return oil)

Frequency Response: 320–380 Hz (−3dB)

Step Response: ≤6 ms (0→100%)

Leakage: <0.3 L/min (neutral position)

Valve Core Type: Standard zero coverage, linear gain (R)

Neutral Function: O type (fully closed, O)

Sealing Material: NBR (−20 to +80°C)

Weight: Approximately 3.2 kg

Installation Standard: NG6 / ISO 4401-03

2. Electrical Parameters (Suffix Customization)

Power Supply: 24VDC (18–32V), V

Control Signal: ±10V Analog Voltage, K

Feedback: Built-in LVDT valve core position closed-loop, 1

Interface: 16-pin aviation connector, 16

Hysteresis: <0.2%

Resolution: <0.1%

Electronic Board: Integrated PWM drive, closed-loop control

3. Model Segmentation Analysis (R16KO1DOVSS2)

R: Standard Valve Core (Zero Coverage)

16: 16-pin aviation connector

K: ±10V Control Signal

O: O-type Neutral (Fully Closed)

1: Built-in LVDT Position Feedback

D0: Standard Gain, No Offset

V: 24VDC Power Supply

SS: Standard NBR Sealing

2: Version Number (Latest Standard Configuration)

4. Panel and Identification

Valve Body: MOOG Label, Model, Serial Number, Pressure Marking

Electrical Connectors: 16-pin definition (Power Supply, Command, Feedback)

5. Key Features

Direct Drive without Pilot: Strong anti-pollution, no pilot leakage, high reliability

Linear Force Motor: Bidirectional large thrust, dynamic and pressure independent

LVDT Closed Loop: High precision, high repeatable positioning, low hysteresis

High-pressure Return Oil: Y port 350bar, suitable for high-pressure accumulator return circuit

Power-off Safety: Spring centering, load stop

II. Typical Application Scenarios

High-speed Precision Press Machine, High-frequency Dynamic Test Bench

High-speed Robot Joint, Flight / Motion Simulator

High-pressure Accumulator System, requiring Y port high-pressure return oil circuit

High-precision Closed-loop Control of Position / Speed / Pressure

Standard Temperature Conditions (−20 to +80°C), Ordinary Hydraulic Oil